High Flow PLTS Series PP pleated filter element water cartridge made in standard factory

High Flow PLTS Series Filter Cartridges are made from depth fine PP or GF non-woven fabrics.The filter has a big diameter of 6 inch/152mm and no inner core, single open.The inside to outside flow pattern ensure that all the particles will be intercepted at the inside of the filter.The long service life and high flow rate result in low investment and less manpower in many applications.

Products Details

Product characteristics:
•  High filtration area, high flow rate.
•  With depth fine non-woven fabrics and scientific design, the filter has a good structure which has high dirt holding capacity, and result in long service life.
• 100% PP material makes the filter cartridge got excellent chemical compatibility. It is suitable for various liquid filtration.
Product specification:
Dimension: [Removal Rating]: 0.5um,1um,3um,5um,10um,20um,50um,75um,100um
[Length]:20"(508mm), 40"(1016mm), 60"(1524mm)
[OD]: Ø 160mm
Material of Constructions: [Media]: Polypropylene(PP)/Glass Fiber
[Drain layer]:China Non-Woven Fabric
[End cap]: Polypropylene(PP)
[Gasket]: Silicone, EPDM, NBR, Viton
[Core]:  Polypropylene(PP)
Performance: [Max. Operating temperature]: 80℃
[Max. Operating DP]: 4.0Bar@21℃,2.4Bar@80℃.
Order Information
Series Number Romoval Rating Length CORE MEDIA SEAL OD
FWHFPLTS 0.5um=05 20"(508mm)=20 PP=P PP=P SILICONE=S 160mm
1um=1 40"(1016mm)=40 Glass Fiber=G EPDM=E
3um=3 60"(1524mm)=60 NBR=N
5um=5 VITON=V
For Example: FWHFPLTS-1-20-P-P-S
  In order to achieve good filtering effect, we often use some filtering machinery and equipment, such as plate and frame fine filter, fine filter and so on. They have certain filtering effect, but the investment cost is relatively high, and the service life is also limited, so we need to do a good job in daily management and maintenance. Compared with these filtration equipment, the large flow filter element not only has low investment cost, but also has guaranteed filtration effect and long service life, which basically solves any problems that may be encountered in the filtration process. This is also the reason why the large flow filter element is highly expected in the filtration industry, and its characteristics and advantages are far more than this. The large flow filter element is different from the general water filter element. It has a large filtration flow and is made of medium materials with high flow. The filter material not only has high filtration efficiency, but also has strong compression resistance and long service life, avoiding various effects caused by pressure loss. The filter element of the large flow filter element has two structural forms, namely, inside in and out and outside in and out. These two structural forms not only facilitate the wide application of the filter element, but also make it more flexible and convenient in the process of use, and can deal with multiple sudden filtering conditions.

Contact us

Please feel free to give your inquiry in the form below We will reply you in 24 hours